TeX / LaTeXコミュの質問です。(prosper)

# 管理人です．
質問の内容が予想できる程度にトピック名決めて下さいね

トピ名変えておきました．

prosper を使ったことはありませんが，サンプルが複雑な表記を要求しているために，特殊なスタイルファイルが多く必要になっているだけかもしれません．

サンプルファイルがどのようなものなのか，提示していただくと議論が進むのではないでしょうか．

とりあえずpdfオプションを消すとコンパイルできると思います．
または，ダミーのps4pdfをソースファイルと同じところにおいても問題ないように見えます．正しい対処法かは知りませんが．

＞管理人さま
どうもすみません。以後気をつけます。

＞m_sdaさま
一応、表記します。見にくいと思いますが。
\documentclass[pdf,autumn,slideColor,colorBG]{prosper}

\usepackage[latin1]{inputenc}
\usepackage{pstricks,pst-node,pst-text,pst-3d}
\usepackage{amsmath}
% Definition of new colors
\newrgbcolor{LemonChiffon}{1. 0.98 0.8}
\newrgbcolor{LightBlue}{0.68 0.85 0.9}

% > BEGIN OF OVERLAPPED COLORS
% Code below devised by Denis Girou (CNRS/IDRIS - France, Denis.Girou@idris.fr)
\newrgbcolor{LemonChiffon}{1. 0.98 0.8}
\newrgbcolor{LightBlue}{0.68 0.85 0.9}
\makeatletter
\newdimen\pst@dimz

% Draw two overlapped surfaces, with computation of the mixed color for
% the intersection of the surfaces
% #1=first surface, #2=color of first surface,
% #3=second surface, #4=color of second surface
\def\ColoredOverlappedSurfaces#1#2#3#4{%
\psset{fillstyle=solid}
% Decode the three components of the first RGB color
\DecodeRGBFirstColor{\csname color@#2\endcsname}%
\psset{fillcolor=#2}
% Draw first surface
#1
% Decode the three components of the second RGB color
\DecodeRGBSecondColor{\csname color@#4\endcsname}%
% Compute the mixed color
\BuildMixedColor
% Draw second surface
\psclip{\psset{fillcolor=#4}#3}
\psset{fillcolor=MixedColor}
% Redraw overlapped surface in the mixed color
#1
\endpsclip}

% Get the three components of the first color
\def\DecodeRGBFirstColor#1{%
\pst@expandafter\pst@getnumiii{#1} {} {} {} {}\@nil
\edef\pst@FirstColorR{\pst@tempg}%
\edef\pst@FirstColorG{\pst@temph}%
\edef\pst@FirstColorB{\pst@tempi}%
%\typeout{Color 1=\pst@tempg,\pst@temph,\pst@tempi}% Debug
}

% Get the three components of the second color
\def\DecodeRGBSecondColor#1{%
\pst@expandafter\pst@getnumiii{#1} {} {} {} {}\@nil
\edef\pst@SecondColorR{\pst@tempg}%
\edef\pst@SecondColorG{\pst@temph}%
\edef\pst@SecondColorB{\pst@tempi}%
%\typeout{Color 2=\pst@tempg,\pst@temph,\pst@tempi}% Debug
}

% Build the mixed RBG color (by means of each three components)
\def\BuildMixedColor{%
% Resulting R component
\pst@dimz=\pst@FirstColorR pt
\advance\pst@dimz\pst@SecondColorR pt
\divide\pst@dimz\tw@
\pst@dimtonum{\pst@dimz}{\pst@MixedColorR}%
% Resulting G component
\pst@dimz=\pst@FirstColorG pt
\advance\pst@dimz\pst@SecondColorG pt
\divide\pst@dimz\tw@
\pst@dimtonum{\pst@dimz}{\pst@MixedColorG}%
% Resulting B component
\pst@dimz=\pst@FirstColorB pt
\advance\pst@dimz\pst@SecondColorB pt
\divide\pst@dimz\tw@
\pst@dimtonum{\pst@dimz}{\pst@MixedColorB}%
% Definition of the mixed color MixedColor
\newrgbcolor{MixedColor}{%
\pst@MixedColorR\space \pst@MixedColorG\space \pst@MixedColorB}
%\typeout{Mixed color=\csname color@MixedColor\endcsname}% Debug
}
\makeatother
% < END OF OVERLAPPED COLORS

\title{A small tour of Prosper facilities}
\subtitle{\LaTeX\ presentations made easy}
\author{\href{http://prosper.sourceforge.net/}{{\green Fr馘駻ic Goualard}}}
\institution{%
Centrum voor Wiskunde en Informatica\\
The Netherlands}



\begin{document}
\maketitle

%---------------------------------------------------------------------- SLIDE -
\begin{slide}{Introduction}
\begin{itemize}
\item If you click on my name in the previous page, you should be
directed to the Prosper homepage, provided your Acrobat Reader has been
properly configured.
\item Press on \texttt{CTRL-L} to go to/leave full screen view.

\item Curious? Want to go directly to the last page? Push
\hyperlink{LAST}{{\green here}}.\hypertarget{SECOND}{ }
\end{itemize}
\end{slide}
%------------------------------------------------------------------------------

%---------------------------------------------------------------------- SLIDE -
\overlays{7}{%
\begin{slide}{Transitions}
\texttt{Prosper} offers seven transitions
between slides:
\begin{itemstep}
\item Split;
\item Blinds;
\item Box;
\item Wipe;
\item Dissolve;
\item Glitter;
\item Replace.
\end{itemstep}
\end{slide}
}
%------------------------------------------------------------------------------


%---------------------------------------------------------------------- SLIDE -
\overlays{2}{%
\begin{slide}{Diagrams}
A small diagram with some few lines of \LaTeX.
\onlySlide{2}{%
Since the diagram and the text are at the same level, there is no
difficulty to add some link from one to \rnode{LIEN}{another}.}%

\vspace{0.4cm}
{\tiny
\begin{equation*}
\setlength{\arraycolsep}{1cm}
\def\tX{\tilde{\tilde{X}}}
\begin{array}{cc}
(X-A,N-A)\rnode{a}{} & \rnode{b}{}(\tX,a)\\[1.5cm]
(X,N)\rnode{c}{} & \rnode{d}{}(\tX,N)\\[1.5cm]
\end{array}
\psset{nodesep=5pt,arrows=->}
\onlySlide*{2}{\nccurve[linecolor=white,angleA=270,angleB=180]{LIEN}{d}}%
\ncline[linecolor=white]{a}{b}\Aput{a}
\ncline[linecolor=white]{a}{c}\Bput{r}
\ncline[linecolor=white,linestyle=dashed]{c}{d}\Bput{b}
\ncline[linecolor=white]{b}{d}\Bput{s}
\end{equation*}}
\end{slide}
}
%------------------------------------------------------------------------------


%---------------------------------------------------------------------- SLIDE -
\overlays{2}{%
\begin{slide}[Dissolve]{A small \emph{clipping} effect}
\small
Any practical use for this?

\begin{psclip}{\psellipse[linestyle=none]%
(4.9,-1.7)(4,1.6)}
\begin{center}
\parbox{7cm}{%
\green
Ce n'騁ait pas une petite gare de province, mais une porte d駻ob馥.
Elle donnait en apparence sur la campagne. Sous l'\oe{}il d'un
contr\^oleur paisible on gagnait une route blanche sans myst鑽e,
un ruisseau, des 馮lantines. Le chef de gare soignait des roses,
l'homme d'駲uipe feignait de pousser un chariot vide. Sous ces
d馮uisements, veillaient trois gardiens d'un monde secret.}
\end{center}
\end{psclip}

\vspace*{-2cm}
\OnlySlide{2}%
\pstextpath{\psccurve[linestyle=none](.5,0)(3.5,1)(3.5,0)(.5,1)}{\green And there are so many other funny effects\dots}
\end{slide}
}
%------------------------------------------------------------------------------


%---------------------------------------------------------------------- SLIDE -
\overlays{3}{%
\begin{slide}{Householder formula}
\small
The Householder formula below lets you compute $f^{-1}(x)$ for an arbitrary
$f$.
{\scriptsize
\begin{equation}\label{Householder}
x_{k+1}\mapsto \Phi_n(x_k)=x_k+(n-1)
\frac{\bigl(\frac{1}{f(x_k)}\bigr)^{n-2}}{\bigl(\frac{1}{f(x_k)}\bigr)^{n-1}}+
f(x_k)^{n+1}%
\fromSlide*{2}{\rnode{NA}{\pscirclebox[linecolor=red]{\psi}}}
\onlySlide*{1}{\rnode{NA}{\pscirclebox[linecolor=red,linestyle=none]{\psi}}}
\end{equation}}

\FromSlide{2}%
where $n\geq 2$ and \rnode{NB}{$\psi$} is an arbitrary function.
\fromSlide*{3}{\nccurve[linecolor=red,angleA=90,angleB=270]{->}{NB}{NA}}

\OnlySlide{3}%
Formula~\eqref{Householder} gives an iteration of order $n$ converging
towards $x_*$ such that: $f(x_*)=0$.
\end{slide}
}
%------------------------------------------------------------------------------

%---------------------------------------------------------------------- SLIDE -
\overlays{2}{%
\begin{slide}[Glitter]{Overlaps of colors}
Intersection of sets. First the yellow one\dots\onlySlide{2}{Then
the blue one.}%
\rput(4,-2){%
\onlySlide{1}{%
\psellipse[fillstyle=solid,fillcolor=LemonChiffon](0.3,-0.7)(1.5,1)}%
\onlySlide{2}{%
\ColoredOverlappedSurfaces{\pscircle{1}}{LightBlue}%
{\psellipse[fillstyle=solid,%
fillcolor=LemonChiffon](0.3,-0.7)(1.5,1)}{%
LemonChiffon}}}%
\OnlySlide{2}%
{\green Remember how to do that with MS PowerPoint?}
\end{slide}
}
%------------------------------------------------------------------------------

%---------------------------------------------------------------------- SLIDE -
\begin{slide}{Last slide}
This is the \hypertarget{LAST}{last} slide. Do you want to go to the
\hyperlink{SECOND}{{\green second one}}?
\end{slide}
%---------------------------------------------------------------------- SLIDE -


\end{document}


＞あべのりさま
ダミーのps4pdfとは
普通のps4pdfをソースファイルと同じところにおけばいいと
言うことでしょうか？

サンプルは，「減少の再現する最小のもの」にした方がいいですよ．
削ってるうちに何故かわかることも少なくありません．

> 普通のps4pdf
ではダミーになりませんよね（笑）
うちは，
\ProvidePackage{ps4pdf}[2003/11/06 dummy]
\endinput
の二行だけ書いたps4pdf.styを同じとこにおいてます．

＞あべのり様
pdfのオプションを消したらコンパイルできて
dvi→ps→pdf
と無事出来ました！
ありがとうございます。
これで、卒研発表のスライドはパワポ使わなくてすみます。
ダミーps4pdfはまた試してみます。